Pod Technical Stethoscope Cases for Littmann Stethoscopes (2024)

Fits:

Littmann® CORE Digital Stethoscope Littmann® Electronic Model 3200 Littmann® Electronic Model 3100 Littmann® Master Cardiology™ Littmann® Cardiology IV™ Littmann® Master Classic II™ Littmann® Classic III™ Littmann® Classic II S.E. Littmann® Classic II Paediatric Littmann® Classic II Infant Littmann® Select Littmann® Lightweight

Pod Technical Stethoscope Cases for Littmann Stethoscopes (1)
LOADING IMAGES

cardiopod™ II

A quality stethoscope can last a lifetime. Give it the protection it deserves! Pod Technical stethoscope cases have been designed to offer the maximum protection for your stethoscope whilst remaining lightweight and stylish. The outer cases are covered in highly durable 1680D nylon, whilst the strong double zipper is nylon coated to offer maximum dust protection for your scope during transportation. Inside the fully lined inner there is a perfectly fitting preformed insert to hold it in place during transit, plus space for spare eartips and a pulse oximeter, and a mesh pocket for extra storage.

Features

  • The world's best Littmann stethoscope storage solution
  • All new patented design
  • Refined from user feedback and industry expert experience
  • Tough and lightweight EVA construction
  • Includes additional recess for Pulse Oximeter storage
  • Strong protective outer shell covered in 1680D ballistic grade nylon for maximum durability
  • Fully lined and easily cleaned inner
  • Pre-formed moulded interior keeps your scope held snugly in place during transit
  • Protected zipper to keep out dust
  • Rubber easy-grip zip pulls for easy opening and closing
  • Interior mesh pocket for additional ancillary storage
  • Interior mould is removable for flexible usage
  • Preformed eartip holders for Littmann type eartips
  • Universal Littmann case - fits any current model perfectly (excluding specialist 22" tubing editions)
  • Carry handle for easy transportation
  • Recess on top to fix Littmann ID tag plate (sold separately)
  • Dimensions: 33.5 x 19 x 4cm

Description

When we started Pod Technical, there were very few stethoscope cases on the market, and certainly nothing that we felt was a good enough product for the task of protecting the investment a medical professional makes into a quality stethoscope. Since we introduced our original classicpod and cardiopod solutions many other sellers have tried to capitalise on our success by producing cheap imitations of our cases or alternative designs that show no thought or knowledge of the requirements.

Our original cases were designed to mimic the optimum form for holding the stethoscope in transit that is used in Littmann's own product boxes. The foam inserts that hold a Littmann scope in place in their original packaging show the tubing held in a relaxed curve, and a much larger box for double-lumen tubing scopes of cardiology grade or higher. This is key to avoid damage and stress to the binaural during transit and storage. Whilst our original cases were designed to meet this standard (and are still in our opinion the best designed cases up to this point) we still felt we could improve upon them. With a wealth of feedback from our customers we were able to focus on creating a solution that is even more efficient and effective than before.

The cardiopod II takes the shaped insert of our original cardiopod and radically redesigns it, utilising our patented cross-over bridge solution to hold the stethoscope perfectly in position in an even smaller form factor. Why use a formed interior at all when you can buy a cheaper 'stethosocpe case' that is essentially just an empty box? For the same reason that Littmann doesn't ship the stethoscopes loose in an empty box. The chestpiece and headset of the stethoscope are metal. The tubing is rubber. As you can imagine, the constant friction of one against the other will cause damage over time. Additionally, forcing the tubing into tight curves in a small box causes stress on the tubing leaving kinks and ultimately damaging it. Our preformed case holds the stethoscope in a stress-free position and separates the metal parts from the tubing. We have used cutting edge 3D scanning and 3D printing to prototype and revise our case dozens of times over until we got it just right. Then we have the materials - our imitators will sell knock-off cases with thin, flimsy materials that crush, snag and break. Our 1680D nylon outer is luggage grade, the padding is thick and firm, and the interior is engineered to add extra structural strength throughout. Our zips have been upgraded to be smooth-pulling, strong and to protect the seam from dust. The mesh ancillary pouch inside was chosen from a selection of sample fabrics to be silky soft as well as strong in order to avoid any rubbing against the stethoscope itself. This case will perfectly fit ANY current model Littmann stethoscope, and hold them in a position that won't put any undue stress on a double-lumen cardiology grade binaural.

To top it off there is also a recess to optionally hold a pulse oximeter and we have included subtle recesses in the lid of the case to show which way up it goes and also to allow the optional affixing of a 3M Littmann identity tag plate (not included).

Pod Technical Stethoscope Cases for Littmann Stethoscopes (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Twana Towne Ret

Last Updated:

Views: 5764

Rating: 4.3 / 5 (44 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Twana Towne Ret

Birthday: 1994-03-19

Address: Apt. 990 97439 Corwin Motorway, Port Eliseoburgh, NM 99144-2618

Phone: +5958753152963

Job: National Specialist

Hobby: Kayaking, Photography, Skydiving, Embroidery, Leather crafting, Orienteering, Cooking

Introduction: My name is Twana Towne Ret, I am a famous, talented, joyous, perfect, powerful, inquisitive, lovely person who loves writing and wants to share my knowledge and understanding with you.